CombiProtect is a wireless combined motion and glass break detector. The device helps to secure the room from intruders entering through doors and windows along with monitoring the current state of the glass. It combines the functions of two detectors - motion detector and glass break detector. It detects motion in the room at a distance of up to 12m and registers broken glass at a distance of up to 9 m from the window. 

 GlassProtect is a small wireless detector that notifies of glass being broken by intruders. It is installed at a distance of 9 m from the window and filters events that cause false alarms. The device detects broken glass using an electret microphone, this registers the sound of impact against the glass and glass falling. The two-factor detection of broken glass prevents false alarms caused by thunder, dogs barking and noise from passing trucks. 

 DoorProtect is a wireless opening detector that notifies of first signs of room intrusion by means of an open door or window. It can be mounted on all types of doors including a metal base. The device detects the door or window being opened by means of high end British manufactured reed switch on which the magnetic field acts. It can operate as a transmitter by sending a signal from a wired sensor to the hub. 

 MotionCam (PhOD) Jeweller is a wireless motion detector supporting photo verification of alarms, Photo on Demand, and Photo by Scenario features. Intended for indoor installation. It can recognise 

movement at a distance of up to 12 meters. Ignores pets when installed and set up correctly. 

 HomeSiren is a wireless indoor siren that loudly notifies of an alarm during detector activation. It is installed indoors to warn of danger or deter intruders. Sound level and alarm length are set in the mobile application, the HomeSiren also offers entry and exit beeps.
Connector for external LED is available. It can be mounted outside your apartment or office to monitor the security system status. 

The device operates security modes when a digital code is entered on the keypad. Indication notifies of current security status, problems with detectors or breakdown of communication with the hub.

Alarm button is available. It notifies of each attempt to guess the password and blocks automatically if the permissible number of entries is exceeded.

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the keypad. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.